Contact

We'd love to hear about your next concrete sawing, drilling, or demolition project.
Contact:
1157 South Bannock St.
Denver, CO 80223
T: 303.733.3741F: 303.733.3742E: info@ddscusa.com
Contact:
1157 South Bannock St.
Denver, CO 80223
T: 303.733.3741F: 303.733.3742E: info@ddscusa.com

Contact us below if you have questions about a job or just a general inquiry.

If you are inquiring about a specific service please try to address as many of the questions related to that service as you can. If you're not sure about any questions, don't worry, a member of our sales team we will always follow up with a call or email.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
  • Are water and power on site?
  • Is it a finished area?
  • Is it on a roof or inside a crawl space?
  • How close can we get our truck to the work area?
  • Will the job be during regular daytime hours or after hours?
  • How many linear feet of cutting?
  • What are the dimensions needed?
  • Are over cuts ok? Cross cuts?
  • How thick is the slab?
  • Is it on grade or suspended?
  • Is it inside or outside?
  • Will you need us to remove the slab?
  • Are there areas or surfaces that need to be protected?
  • If in a basement:
    How will we gain access?
    How far is it to the furthest cut?
  • If outside:
    Is the slab concrete or asphalt?
    Does it need to be vacuumed?
  • If inside:
    How far is it to the furthest cut?
    Will hand sawing be required?
  • How many linear feet of cutting?
  • What are the dimensions needed?
  • Are over cuts ok? Are cross cuts needed?
  • How thick is the wall?
  • How high is the top of the cut?
  • Will we need a lift or scaffold (if necessary)?
  • Will cutting be done from inside or outside?
  • How far is it to the furthest cut?
  • What material is to be cut (brick, concrete, etc)?
  • Will any cuts be flush to the floor, etc?
  • Are there areas or surfaces that need to be protected?
  • How many holes are needed? What sizes? What thicknesses?
  • Is drilling needed in a wall, slab, or roof?
  • What material is to be drilled (brick, concrete, etc)?
  • For wall drilling:
    How high are the holes on the wall?
    Will we need a lift or scaffold?
    Will any of the drilling be in tight areas (stairwells, etc.)?
  • For slab drilling:
    Is it on grade or suspended?
    Will you need us to spot bellow?
    Are there areas or surfaces that need to be protected (finished areas)?